Temporizador/Contador Multifuncion TC Pro 48

Multifuncion totalizador Array TC-Pro482

Temporizador: 12 modos de trabajo ( ton-toff, twin timer, etc ).base de tiempo 20ms - 1ms, dos salidas preseteables.

Contador: 12 modos de configuracion diferentes, contador simple, doble, sumador/ restador de pulsos. frecuancia hasta 5Khz

                     Funcion de bacheo, Totalizador, 2 salidas rele preseteables

Tacometro: 4 modos de trabajo, hasta 10Khz, 2 salidas preseteables para valor umbral  maximo y minimo. 

 

Alimentacion 24vdc, ( se consigue en alimentacion 110-220v)

2 salidas rele

2 entradas de pulsos configurables PNP-NPN

Comunicacion Modbus serial RTU, RS232,485,422

Accesorio opcional : Software y cable para configuracion desde PC y respaldo.

Display retroluminoso fondo oscuro y digitos claros

Fuente interna 12vdc 100mA Para alimentacion sensor u otros.

Teclas de configuracion y preseteo frontales de facil acceso

Montaje para Riel din, se consigue para frente de tablero.

 

 

 

 

 

 

 
▲Highly visible display with backlit negative transmissive LCD
▲Conform to the key design of ergonomics
▲Five Key Protection Modes:KP-1~KP-5　
▲ EEPROM (overwrites:100,000 times min.) that can store data for 10 years min.　
▲NPN/PNP switchable DC-voltage input
▲12VDC external supply power can drive the external optical sensors,such as encoder, infrared switches etc..
▲Applied to connect

 

 

Type
 TC-Pro480 TC-Pro481 TC-Pro482
Classification
 Digital Timer Digital Counter /Tachometer Digital Timer/Counter /Tachometer
Supported configurations

Timer, Dual Timer, 2-Stage Timer

 1-stage counter, 2-stage counter, total counter, batch counter, dual counter, and tachometer (selectable) Timer, Dual Timer, 2-Stage Timer,1-stage counter, 2-stage counter, total counter, batch counter, dual counter, and tachometer (selectable)
Rated supply voltage
 100~240VAC(50/60HZ), 24VAC(50/60HZ), 12~24VDC( permissible ripple ：20％(p-p) max. )
Operating voltage range
 85％~110％Rated Supply Voltage (12~24VDC： 90％~110％)
Power consumption
 Approx. 6.2VA at 264VAC, Approx. 5.1VA at 26.4VAC, Approx. 2.4W at 12VDC
Mounting method
 Flush mounting and DIN mounting
External connections
 Screw terminals
Input signals
 CP1, CP2, Reset 1 CP1, CP2, Reset 1, Reset 2 CP1, CP2, Reset 1, Reset 2
Max. counter speed
 None 30Hz or 5KHz (10KHz for Tachometer) 30Hz or 5KHz (10KHz for Tachometer)
Timer mode
 Elapsed time (UP), Remaining time (down) (selectable) None Elapsed time (UP), Remaining time (down) (selectable)
Input method
No-voltage input : ON impedance : 1kΩ max. ( leakage current ：5~20 mA when 0Ω) ON residual voltage :3V max. OFF impedance :100kΩ min.
Voltage Input : High(logic) level : 4.5~30 VDC Low(logic) level :0~2 VDC( Input resistance: approx. 4.7 kΩ)
Output method
 Relay/transistor output
Control output
SPDT contact output: 5A at 250 VAC, resistive load(cosФ=1)

Minimum applied load: 10 mA at 5 VDC　　　　　　　　　　　
Transistor output: NPN open collector, max. 100mA at 30 VDC
Residual voltage : 1.5 VDC max.(approx. 1V)
Output category according to EN60947-5-1 for timers with Contact outputs
(AC-15; 250V 3A / AC-13; 250V 5A / DC-13; 30V 0.5A)
Output category according to EN60947-5-2 for timers with Transistor outputs (DC-13; 30V 100 mA)
NEMA B300 Pilot Duty, 1/4 HP 5-A resistive load at 120 VAC, 1/3 HP 5-A resistive load at 240 VAC
Key protection
 Yes
Life expectancy
Mechanical : 10,000,000 operations min.
Electrical : 100,000 operations min.(5 A at 250 VAC，resistance load)
Weight
 Approx. 168g

●

 A variety of alternative communication format
 
　 Communication rate: 1200～57600bps
  Date Bit: 7/8bit
  Parity check: N/0/E
　 Stop bit: 1/2bit
● Free PC software TCSOFT
　 Quick setting and real time monitoring
● Support MODBUS protocol
　 Connect all kinds of HMI/Text Display/OPC/Self-made software
●
 Support RS-232/485/422 communication interface mode

 

Contacto

Servicio de Automatismo y Control Industrial

R8 Km24 - Barros Blancos - Canelones - Uruguay

Tel: 00598- 22880113
Cel: 099514209
skype orlando.bosolasco